next up previous contents index
Next: Superposing Signals Up: Sinusoids, amplitude and frequency Previous: Frequency   Contents   Index


Synthesizing a sinusoid

In most widely used audio synthesis and processing packages (Csound, Max/MSP, and Pd, for instance), the audio operations are specified as networks of unit generators[Mat69] which pass audio signals among themselves. The user of the software package specifies the network, sometimes called a patch, which essentially corresponds to the synthesis algorithm to be used, and then worries about how to control the various unit generators in time. In this section, we'll use abstract block diagrams to describe patches, but in the "examples" section (Page [*]), we'll choose a specific implementation environment and show some of the software-dependent details.

To show how to produce a sinusoid with time-varying amplitude we'll need to introduce two unit generators. First we need a pure sinusoid which is made with an oscillator. Figure 1.5 (part a) shows a pictorial representation of a sinusoidal oscillator as an icon. The input is a frequency (in cycles per second), and the output is a sinusoid of peak amplitude one.

Figure 1.5: Block diagrams for (a) a sinusoidal oscillator; (b) controlling the amplitude using a multiplier and an amplitude signal $y[n]$.
\begin{figure}\psfig{file=figs/fig01.05.ps}\end{figure}

Figure 1.5 (part b) shows how to multiply the output of a sinusoidal oscillator by an appropriate scale factor $y[n]$ to control its amplitude. Since the oscillator's peak amplitude is 1, the peak amplitude of the product is about $y[n]$, assuming $y[n]$ changes slowly enough and doesn't become negative in value.

Figure 1.6: Two amplitude functions (parts a, c), and (parts b, d), the result of multiplying them by the pure sinusoid of Figure 1.1.
\begin{figure}\psfig{file=figs/fig01.06.ps}\end{figure}

Figure 1.6 shows how the sinusoid of Figure 1.1 is affected by amplitude change by two different controlling signals $y[n]$. The controlling signal shown in part (a) has a discontinuity, and so therefore does the resulting amplitude-controlled sinusoid shown in (b). Parts (c) and (d) show a more gently-varying possibility for $y[n]$ and the result. Intuition suggests that the result shown in (b) won't sound like an amplitude-varying sinusoid, but instead like a sinusoid interrupted by an audible "pop" after which it continues more quietly. In general, for reasons that can't be explained in this chapter, amplitude control signals $y[n]$ which ramp smoothly from one value to another are less likely to give rise to parasitic results (such as that "pop") than are abruptly changing ones.

For now we can state two general rules without justifying them. First, pure sinusoids are the signals most sensitive to the parasitic effects of quick amplitude change. So when you want to test an amplitude transition, if it works for sinusoids it will probably work for other signals as well. Second, depending on the signal whose amplitude you are changing, the amplitude control will need between 0 and 30 milliseconds of "ramp" time--zero for the most forgiving signals (such as white noise), and 30 for the least (such as a sinusoid). All this also depends in a complicated way on listening levels and the acoustic context.

Suitable amplitude control functions $y[n]$ may be made using an envelope generator. Figure 1.7 shows a network in which an envelope generator is used to control the amplitude of an oscillator. Envelope generators vary widely in design, but we will focus on the simplest kind, which generates line segments as shown in Figure 1.6 (part c). If a line segment is specified to ramp between two output values $a$ and $b$ over $N$ samples starting at sample number $M$, the output is:

\begin{displaymath}
y[n] = a + (b - a) {{n-M} \over N}, \hspace{0.1in} M \le n \le M+N-1.
\end{displaymath}

The output may have any number of segments such as this, laid end to end, over the entire range of sample numbers $n$; flat, horizontal segments can be made by setting $a=b$.

In addition to changing amplitudes of sounds, amplitude control is often used, especially in real-time applications, simply to turn sounds on and off: to turn one off, ramp the amplitude smoothly to zero. Most software synthesis packages also provide ways to actually stop modules from computing samples at all, but here we'll use amplitude control instead.

The envelope generator dates from the analog era [Str95, p.64] [Cha80, p.90], as does the rest of Figure 1.7; oscillators with controllable frequency were called voltage-controlled oscillators or VCOs, and the multiplication step was done using a voltage-controlled amplifier or VCA [Str95, pp.34-35] [Cha80, pp.84-89]. Envelope generators are described in more detail in Section 4.1.

Figure 1.7: Using an envelope generator to control amplitude.
\begin{figure}\psfig{file=figs/fig01.07.ps}\end{figure}


next up previous contents index
Next: Superposing Signals Up: Sinusoids, amplitude and frequency Previous: Frequency   Contents   Index
Miller Puckette 2006-12-30